Optimizing Axial Flow Finger Millet (Eleusine coracana L.) Thresher for Efficient Performance: A Taguchi Orthogonal Array Approach
DOI:
https://doi.org/10.52151/jae2025622.1924Keywords:
axial flow thresher, cleaning efficiency, threshing efficiency, optimization, output capacityAbstract
The traditional methods of threshing finger millet crop, such as beating with a stick or foot trampling, are highly drudgery prone, time-consuming, and labour-intensive operation. To overcome these limitations, an axial flow mechanical thresher developed by Indira Gandhi Krishi Vishwavidyalaya (IGKV), Raipur for finger millet crops was evaluated for optimization of operational parameters. Operational parameters such as feed rate (FR), peripheral speed (PS), moisture content (MC), sieve size (SS), inclination angle (IA) and stroke length (SL) were optimized to maximize threshing efficiency (TE), output capacity (OC) and cleaning efficiency (CE) of the thresher. Taguchi’s orthogonal arrays were used to estimate the optimum conditions for threshing and cleaning unit. It is apparent from the study that the highest TE, OC, and CE were achieved at FR of 3 kg min-1, PS of 9.14 m s-1, MC of 11%, SS of 3 mm, IA of 4°, and SL of 20 mm. At optimized conditions, the highest TE, OC, and CE of 99.10%, 2.56 kg min-1, and 96.34% were observed, with a minimum broken percentage of 1.60%.
Downloads
References
Abdeen, M. A., Salem, A. E., & Zhang, G. (2021). Longitudinal axial flow rice thresher performance optimization using the Taguchi technique. Agriculture, 11(2), 88. https://doi.org/10.3390/agriculture11020088
Agrawal, T., Gautam, R., Agrawal, S., Singh, V., Kumar, M., & Kumar, S, (2020). Optimization of engine performance parameters and exhaust emissions in compression ignition engine fueled with biodiesel-alcohol blends using Taguchi method, multiple regression, and artificial neural network. Sustainable Futures, 2, 100039. https://doi.org/10.1016/j.sftr.2020.100039
Anonymous (2023). Agricultural Statistics at a Glance 2022. Economics & Statistics Division, Department of Agriculture & Farmers Welfare, Division Ministry of Agriculture & Farmers Welfare, New Delhi. Available at: https://desagri.gov.in/wp-content/uploads/2023/05/Agricultural-Statistics-at-a-Glance-2022.pdf (accessed on 01 January 2024).
Belay, D., & Fetene, M. (2021). The effect of moisture content on the performance of Melkassa multi-crop thresher in some cereal crops. Bioprocess Engineering, 5(1), 1–10. https://doi.org/10.11648/j.be.20210501.11
Chandrakanthappa, K., Batagurki, S. B., & Kumar, C. (2001). Evaluation of different threshing methods for primary processing of finger millet. Mysore Journal of Agricultural Science, 35(2), 128–132.
Chaturvedi, S., & Rathore, F. (2018). Development of threshing cylinder for small millets. Agriculture Science Digest, 38(3), 178–182. https://doi.org/10.18805/ag.D-4774.
Das, D., & Singh, A. K. (2022). Ergonomic design and evaluation of gemstone polishing workstation. International Journal of Occupational Safety and Ergonomics, 29(4), 1301-1318. https://doi.org/10.1080/10803548.2022.2120282
Gbabo, A., Gana, I. M., & Amoto, M. S. (2013). Design, fabrication, and testing of a millet thresher. Net Journal of Agricultural Science, 1(4), 100–106.
Gull, A., Ahmad, G., Prasad, K., & Kumar, P. (2016). Technological, processing, and nutritional approach of finger millet (Eleusine coracana L.) – A mini review. Journal of Food Processing and Technology, 7(5), 1000593. https://doi.org/10.4172/2157-7110.1000593.
Hanumantharaju, K. N., Vikas, L., & Kumar, P. (2017). Comparison study of prototype thresher with different methods of threshing whole crop finger millet. International Journal of Science, Environment and Technology, 6 (1), 391–398.
Naveen Kumar, D. B., Kumar, P., Arun Kumar, H. S., Sandeep, T. N., & Sudhadevi, G. (2013). Efficiency of mechanical thresher over the traditional method of finger millet threshing. International Journal of Agriculture Engineering, 6(4), 184–188.
Parihar, D. S., Shrivastava, A. K., & Awasthi. V. (2022). Effect of machine and crop parameters on paddy (Oryza sativa) threshing using axial flow thresher. Journal of Agricultural Engineering (India), 59 (3), 229-239. https://doi.org/10.52151/jae2022593.1778.
Parmanand, & Verma, A. (2015). Development and testing of pedal-operated thresher for finger millet. International Journal of Agricultural Science and Research, 5(3), 299–308.
Patel, K. K., & Naik, R. K. (2022). Studies on performance parameters for the development of finger millet thresher. International Journal of Plant and Soil Science, 34(24), 900–907. https://doi.org/10.9734/ijpss/2022/v34i242717
Patel, K. K., Naik, R. K., Patel, G., & Pandey, S. (2022). Studies on some physical and engineering properties of finger millet for designing thresher. Biological Forum – An International Journal, 14(4), 387–393.
Powar, R. V., Aware, V. V., Patil, S. B., & Shahare, P. U. (2019a). Development and evaluation of finger millet thresher-cum-pearler. Journal of Biosystems Engineering, 44, 194–206. https://doi.org/10.1007/s42853-019-00029-7
Powar, R. V., Aware, V. V., & Shahare, P. U. (2019b). Optimizing operational parameters of finger millet threshing drum using RSM. Journal of Food Science and Technology, 56(7), 3481–3491. https://doi.org/10.1007/s13197-019-03836-0
Pradhan, A., Nag, S. K., & Patil, S. K. (2015). Traditional methods of harvesting and processing for small millet in the tribal region of Bastar. Indian Journal of Traditional Knowledge, 9(4), 681–663.
Shukla, P., Nandi, S., Shau, P., Patel, A., & Tripathi, H. (2020). Field test analysis of straw reaper combine for optimized operating condition to improve performance. Current Journal of Applied Science and Technology, 39(8), 77–86. https://doi.org/10.9734/cjast/2020/v39i830595
Singh, K. P., Chandel, N. S., Potdar, R. R., Jat, D., Agrawal, K. N., & Hota, S.(2018a). Assessment of engineering properties of Proso millet (Panicum miliaceum). Journal of Agricultural Engineering (India), 55(2), 42-51. https://doi.org/10.52151/jae2018552.1653
Singh, G., Mohapatra, S. K., Ragit, S. S., & Kundu, K. (2018b). Optimization of biodiesel production from grape seed using Taguchi’s orthogonal array. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40(18), 2144–2153. https://doi.org/10.1080/15567036.2018.1495778
Singh, K. P., Mishra, H. N., & Sahu, S. (2010). Optimization of machine parameters of finger millet thresher-cum-pearler. Agricultural Mechanization in Asia, Africa, and Latin America, 41(1), 60–68.
Singh, K. P., Poddar, R. R., Agrawal, K. N., Hota, S., & Singh, M. K. (2015). Development and evaluation of multi millet thresher. Journal of Applied and Natural Science, 7(2), 939–948. https://doi.org/10.31018/jans.v7i2.711
Tejaswini, V. V., Bhaskara Rao, D., Lakshmipathy, R., & Kumar, S. (2018). Development and evaluation of cleaner-cum-pearler for finger millet. International Journal of Current Microbiology and Applied Sciences, 7(11), 1819–1830. https://doi.org/10.20546/ijcmas.2018.711.206
