Design, Development and Evaluation of a Power-Operated Cono Weeder for Wetland Rice Farming
DOI:
https://doi.org/10.52151/jae2025623.1946Keywords:
depth control, field capacity, plant damage, power weeding, slider crank mechanism, weeding cones, weeding efficiencyAbstract
Manual cono weeding in rice cultivation demands significant labor and energy. To address the same, a power-operated cono weeder was developed at the Agricultural Engineering and Research Institute, Tamil Nadu Agricultural University, Kumulur, Trichy, between 2018 and 2020. The new design incorporated a main frame, a 1 kW petrol engine, a power transmission system, a handle, plastic molded ground wheels, a slider crank mechanism for weeding cone motion, an adjustable depth control lever, and plastic molded weeding cones with MS blades. It offers adjustable depth settings from 15 mm to 70 mm. Field performance was assessed across three operational speeds (0.28 m s-1, 0.42 m s-1 and 0.56 m s-1) and water levels (10 mm, 25 mm, and 40 mm). Results showed maximum weeding efficiency (85%) and field capacity (0.026 ha h-1) at an operational speed of 0.42 m s-1 and a water level of 25 mm. Minimal plant damage (1.2%) occurred at an operational speed of 0.28 m s-1 and a water level of 10 mm. The weeder demonstrated an operational efficiency of 86.5% in the field. This power-operated cono weeder offers a promising solution to the labor-intensive manual cono weeding in rice cultivation. Its adjustable depth control and efficient field performance indicate potential for enhancing productivity while reducing labor costs and environmental impact.
Downloads
References
Anonymous. (2024). Agricultural Statistics at a Glance 2023. Economics, Statistics & Evaluation Division, Department of Agriculture and Farmers Welfare, Ministry of Agriculture & Farmers Welfare, Government of India, New Delhi. Available at: https://desagri.gov.in/document-report-category/agriculture-statistics-at-a-glance/ (accessed on 5 August, 2025).
Baig, I. A., Mohammad, S., Akram, V., Chandio, A. A., & Gupta, Y. (2023). Examining the impacts of climatological factors and technological advancement on wheat production: A road framework for sustainable grain production in India. Environment, Development and Sustainability, 26(5), 12193–12217. https://doi.org/10.1007/s10668-023-03746-4
Chauhan, B. S., & Johnson, D. E. (2010). Weedy rice (Oryza sativa L.). I. Grain characteristics and growth response to competition of weedy rice variants from five Asian coun tries. Weed Science, 58 (4), 374-380. https://doi.org/10.1614/WS-D-09-00071.1
Chowdhury, M., Khura, T. K., Upadhyay, P. K., Parray, R. A., Kushwaha, H. L., Singh, C., Lama, A., & Mani, I. (2024). Assessing vegetation indices and productivity across nitrogen gradients: A comparative study under transplanted and direct-seeded rice. Frontiers in Sustainable Food Systems, 8, 1351414. https://doi.org/10.3389/fsufs.2024.1351414
Chowdhury, M., Lande, S. D., Khura, T. K., Parray, R. A., Upadhyay, P. K., and Kumar, P. (2023). Energetics and cost economics of wheat–based cropping system. Annals of Agricultural Research 44(1), 37-45.
Gatkal, N. R., Nalawade, S. M., Shelke, M. S., Sahni, R. K., Walunj, A. A., Kadam, P. B., & Ali, M. (2025). Review of cutting-edge weed management strategy in agricultural systems. International Journal of Agricultural and Biological Engineering, 18(1), 25–42. https://doi.org/10.25165/j.ijabe.20251801.9583
ISI. (1976). Indian Standard 7927-1975: Method of Field Testing for Manually-Operated Paddy Weeder. Indian Standards Institution (ISI), New Delhi. 10 p. Available at: https://archive.org/details/gov.in.is.7927.1975/page/n3/mode/2up (accessed on 5 August 2025).
Kaur, N., Kumar, A., Malik, T., Girdhar, M., Singh, M., Singh, R., Tariq, M., & Mohan, A. (2025). Herbicide use and weed management strategies in hemp cultivation. Journal of Cannabis Research, 7, 27. https://doi.org/10.1186/s42238-025-00280-0
Khurmi, R. S., & Gupta, J. K. (2005). Theory of Machines. S. Chand Publishing, New Delhi.
Kiran, U. M., Singh, S. P.., Kumar, A., Ekka, U., Bana, R. S., & Ramasubramanian, V. (2024). Ergonomic assessment of walk-behind battery-powered two-wheel weeder. Journal of Agricultural Engineering (India), 61(2), 157–168. https://doi.org/10.52151/jae2024612.1842
Kumar, A. A., Haribabu, B., Rao, A. S., & Someswararao, C. (2013). Ergonomical evaluation of manually operated weeder under wet land condition. Scientific Research and Essays, 8(6), 249-255.
Kumar, P., Kushwaha, H. L., Kumar, A., Parray, R. A., Singh, T., Meena, M. C., …, & Rathod, S. K. (2024). Efficiency and cost-effectiveness analysis of developed embedded system-controlled seed and fertilizer applicator. Journal of Experimental Agriculture International, 46(5), 626–635. https://doi.org/10.9734/jeai/2024/v46i52418
Kumar, V., & Ladha, J. K. (2011). Direct seeding of rice: Recent developments and future research needs. In: Advances in Agronomy (Vol. 111, pp. 297–413), Academic Press. https://doi.org/10.1016/B978-0-12-387689-8.00001-1
Madhusudan, B. S., & Preetham, M. N. S. (2020). Design, development and performance evaluation of manually operated groundnut planter. Indian Journal of Ecology, 47(3), 858-862.
Madhusudan, B. S., Kushwaha, H. L., Kumar, A., Parray, R. A., Swain, S. S., Chowdhury, M., …, & Mattar, M. A. (2024). Critical assessment of furrow openers and operational parameters for optimum performance under conservation tillage. Scientific Reports, 14, 20928. https://doi.org/10.1038/s41598-024-70569-2
Madhusudan, B. S., Nag, R. H., Prajwal, R., Aruna, T. N., Bhat, A. G. K., & Nataraja, B. S. (2023). A review on a computer vision system for automatic crop-weed detection. Biological Forum – An International Journal, 15(10),255-262.
Mohanty, D. K., & Mohanty, M. K. (2010). Assessment of yield using cono weeder in SRI method of paddy cultivation. Agricultural Engineering Today, 34(1), 21-24.
Mohapatra, P. K., Sarkar, R. K., Panda, D., & Kariali, E. (2025). Tillering Behavior of Rice Plant. Springer Nature Singapore. https://doi.org/10.1007/978-981-97-5235-5
Mondal, B., Bisen, J., Jambhulkar, N., & Tripathi, R. (2022). Rice supply, demand and exportable surplus in India: Present vis-à-vis thirty years ahead. Oryza-An International Journal on Rice, 59(4), 504–511. https://doi.org/10.35709/ory.2022.59.4.13
Monira, S, Ali, M. I., Sarker, U. K., Islam, M. S., Zaman, F., Begum, M., & Uddin, M. R. (2022). Efficacy and economics of different weed control practices in boro rice under high Ganges River floodplain of Bangladesh. Journal of Agriculture, Food and Environment, 3(3), 32-39. https://doi.org/10.47440/JAFE.2022.3307
Munda, S., Nayak, B. K., Das, S. R., Dey, S., A. Pradhan, Swain, C. K., & Muduli, B. C. (2024). Understanding the effects of changing climate on weeds and their management. In: H. Pathak, D. Chatterjee, S. Saha, B. Das (Eds), Climate change impacts on soil-plant-atmosphere continuum. Advances in Global Change Research (vol 78, pp. 405–425). Springer Nature Singapore. https://doi.org/10.1007/978-981-99-7935-6_15
Naresh, R. K. (Ed.). (2020). Advances in Agriculture Sciences (1st ed.). AkiNik Publications. 145 p. https://doi.org/10.22271/ed.book.751
Nath, B. C, Nam, Y.-S., Huda, M. D., Rahman, M. M., Ali, P., & Paul, S. (2017). Status and Constrain for Mechanization of Rice Harvesting System in Bangladesh. Agricultural Sciences, 8(6), 492–506. https://doi.org/10.4236/as.2017.86037
Olaoye, J. O., & Adekanye, T. A. (2011). Analysis of the motion of weeding tools and development of a rotary power weeder. Journal of Agricultural Engineering and Technology, 19(2), 9-25.
Paul, S., Nath, B. C., Huda, M. D., Bhuiyan, M. G. K, & Paul, H. (2025). Assessment of mechanical weeders in paddy fields: A study on operational effectiveness in Bangladesh. Heliyon, 11(4), e42639. https://doi.org/10.1016/j.heliyon.2025.e42639
Rathod, S. K., Kushwaha, H. L., Kumar, A., Khura, T. K., Kumar, R., Dass, A., …, & Kumar, P. (2024). Comparative analysis on cost-economics evaluation of robotic tiller-planter against conventional tillage and planting operations. International Journal of Environment and Climate Change, 14(1), 433–442. https://doi.org/10.9734/ijecc/2024/v14i13853
Remesan, R., Roopesh, M. S., Remya, N., & Preman, P. S. (2007). Wetland paddy weeding: A comprehensive comparative study from South India. Agricultural Engineering International: The CIGR Ejournal, 9(2), 07-11.
Rodenburg, J., Saito, K., Irakiza, R., Makokha, D. W., Onyuka, E. A., & Senthilkumar, K. (2015). Labor-saving weed technologies for lowland rice farmers in sub-Saharan Africa. Weed Technology, 29(4), 751–757. https://doi.org/10.1614/wt-d-15-00016.1
Sahu, G., & Raheman, H. (2022). Development of a Solar Energy Operated Weeder for Wetland Paddy Crop. Journal of Renewable Energy and Environment, 9(4), 10-20 https://doi.org/10.30501/jree.2022.304080.1255
Sebastian, S. & Kalita, K. (2022). Study on comparative performances of selected paddy weeders developed in India. Journal of Agricultural Engineering (India), 59(4), 333-345. https://doi.org/10.52151/jae2022594.1786
Sebastian, S., & Kalita, K. (2025). Development and field performance assessment of roller rake weeder. Crop Protection, 189, 107051. https://doi.org/10.1016/j.cropro.2024.107051
Shakya, H. B., Parmar, M. R., Kumpavat, M. T., & Swarnkar, R. (2016). Development and performance evaluation of manually operated cono-weeder for paddy crop. International Refereed Journal of Engineering and Science, 5(7), 6-17.
Singh, S. P. (2010). Ergonomical evaluation of cono-weeder with farm women. Agricultural Engineering Today, 34(3), 31-36.
Surendran, U., Raja, P., Jayakumar, M., & Subramoniam, S. R. (2021). Use of efficient water saving techniques for production of rice in India under climate change scenario: A critical review. Journal of Cleaner Production, 309, 127272. https://doi.org/10.1016/j.jclepro.2021.127272
Terzaghi, K., Peck, R. B. & Mesri, G. (1996). Soil mechanics in engineering practice: John Wiley & Sons. Inc., New York. 529 p.
Thorat, D. S., Sahoo, P. K., De, D., & Iquebal, M. A. (2014). Design and development of ridge profile power weeder. Journal of Agricultural Engineering (India), 51(4), 7-13. https://doi.org/10.52151/jae2014514.1560
Vijayakumar, M., Sundar Singh, S. D., Prabhakaran, N. K., & Thiyagarajan, T. M. (2005). Effect of SRI (System of Rice Intensification) practices on the yield attributes, yield and water productivity of rice (Oryza sativa L.). Acta Agronomica Hungarica, 52(4), 399–408. https://doi.org/10.1556/aagr.52.2004.4.9
Woyessa, D. (2022). Weed control methods used in agriculture. American Journal of Life Science and Innovation, 1(1), 19–26. https://doi.org/10.54536/ajlsi.v1i1.413
