Assessment and Prediction of Whole Body Vibration Exposure in Agricultural Tractors During Tillage Operations Using Supervised Machine Learning
DOI:
https://doi.org/10.52151/jae2025624.1977Keywords:
ANN model, daily vibration exposure, hyperparameter tuning, ride comfort, support vector regression model, tillage implementsAbstract
Ride comfort during field operation is required for the operator’s health and safety. The extended exposure to whole body vibration (WBV) can adversely impact operator health, causing fatigue, spinal injuries, and long-term musculoskeletal disorders. This study focuses on analyzing and predicting tractor ride comfort using supervised machine learning techniques. Ride comfort was evaluated using metrics such as Overall Vibration Value (OVV), A(8), and Seat Effective Amplitude Transmissibility (SEAT, %). Experimental data were collected from three different tractor models operating under different tillage operations. Variables such as engine power, engine speed, working depth, implement type, and the operator’s body mass were considered to understand their influence on vibration levels. The results revealed that the OVV and A(8) values exceeded the exposure values of ISO 2631-1:1997. These higher levels indicate a risk to operator health during prolonged tractor use. Supervised machine learning models, including Least Absolute Shrinkage and Selection Operator (LASSO) Regression, Support Vector Regression (SVR), Extreme Gradient Boosting (XGBoost) Regression, and Artificial Neural Networks (ANN), were developed to predict OVV values using the identified input features. The effectiveness of each model was assessed using evaluation metrics like Mean Absolute Error (MAE) and the coefficient of determination (R²). The results showed progressive improvement in predictive accuracy, with R² scores of 0.62 for LASSO, 0.74 for SVM, 0.82 for XGBoost, and 0.92 for ANN. The ANN model outperformed with the higher R2 value and lower Mean Square Error (MSE) value of 0.16.
Downloads
References
Adam, S. A., & Jalil, N. A. A. (2017). Vertical suspension seat transmissibility and SEAT values for seated person exposed to whole-body vibration in agricultural tractor preliminary study. Procedia Engineering, 170, 435–442. https://doi.org/10.1016/J.PROENG.2017.03.070 DOI: https://doi.org/10.1016/j.proeng.2017.03.070
Adam, S. A., Jalil, N. A. A., Rezali, K. A. M., & Ng, Y. G. (2020). The effect of posture and vibration magnitude on the vertical vibration transmissibility of tractor suspension system. International Journal of Industrial Ergonomics, 80, 103014. https://doi.org/10.1016/J.ERGON.2020.103014 DOI: https://doi.org/10.1016/j.ergon.2020.103014
Cho, Y., & Yoon, Y.-S. (2001). Biomechanical model of human on seat with backrest for evaluating ride quality. International Journal of Industrial Ergonomics, 27(5), 331–345. https://doi.org/https://doi.org/10.1016/S0169-8141(00)00061-5 DOI: https://doi.org/10.1016/S0169-8141(00)00061-5
de la Hoz-Torres, M. L., Aguilar, A. J., Ruiz, D. P., & Martínez-Aires, M. D. (2022). Whole body vibration exposure transmitted to drivers of heavy equipment vehicles: A comparative case according to the short-and long-term exposure assessment methodologies defined in ISO 2631-1 and ISO 2631-5. International Journal of Environmental Research and Public Health, 19(9), 5206. https://doi.org/10.3390/IJERPH19095206 DOI: https://doi.org/10.3390/ijerph19095206
Deboli, R., Calvo, A., & Preti, C. (2017). Whole-body vibration: Measurement of horizontal and vertical transmissibility of an agricultural tractor seat. International Journal of Industrial Ergonomics, 58, 69–78. https://doi.org/10.1016/J.ERGON.2017.02.002 DOI: https://doi.org/10.1016/j.ergon.2017.02.002
Deo, M. M., Kumar, A., & Mani, I. (2021). Whole body vibration on drivers seat and fender with fully loaded double axle tractor-trailers under different operating conditions: Whole body vibration on drivers seat and fender. Journal of AgriSearch, 8(2), 149–154. https://doi.org/10.21921/JAS.V8I2.7300 DOI: https://doi.org/10.21921/jas.v8i2.7300
Dewangan, K. N., Yao, Y., & Rakheja, S. (2022). Seat-to-head transmissibility responses of seated human body coupled with visco-elastic seats. Vibration 2022, 5(4), 860–882. https://doi.org/10.3390/VIBRATION5040051 DOI: https://doi.org/10.3390/vibration5040051
Didari, S., Talebnejad, R., Bahrami, M., & Mahmoudi, M. R. (2023). Dryland farming wheat yield prediction using the LASSO regression model and meteorological variables in dry and semi-dry region. Stochastic Environmental Research and Risk Assessment, 37(10), 3967–3985. https://doi.org/10.1007/S00477-023-02490-5/FIGURES/5 DOI: https://doi.org/10.1007/s00477-023-02490-5
Du, X., Sun, C., Zheng, Y., Feng, X., & Li, N. (2021). Evaluation of vehicle vibration comfort using deep learning. Measurement, 173, 108634. https://doi.org/10.1016/j.measurement.2020.108634 DOI: https://doi.org/10.1016/j.measurement.2020.108634
European Parliament and Council. (2002). Directive 2002/44/EC of the European Parliament and the Council of 25 June 2002 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (vibration) (sixteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC). Official Journal of the European Communities, L 177/13. Avaialble at: https://eur-lex.europa.eu/resource.html?uri=cellar:546a09c0-3ad1-4c07-bcd5-9c3dae6b1668.0004.02/DOC_1&format=PDF (accessed on 06 December 2025).
FAO, IFAD, UNICEF, WFP, & WHO. (2019). The State of Food Security and Nutrition in the World 2019. Safeguarding against economic slowdowns and downturns. Food and Agriculture Organization of the United Nations Rome. https://doi.org/10.4060/CA5162EN
Ganesan, R., Sankaranarayanan, G., Pradeep Kumar, M., Bupesh Raja, V. K., & Saravanan, S. (2022). Measurement of hand-arm vibration syndrome of an agricultural tractor steering wheel using machine vision system. PERIODICO Di MINERALOGIA, 91(4), 891–908. https://doi.org/10.37896/pd91.4/91459 DOI: https://doi.org/10.37896/pd91.4/91459
Gertz, M., Große-Butenuth, K., Junge, W., Maassen-Francke, B., Renner, C., Sparenberg, H., & Krieter, J. (2020). Using the XGBoost algorithm to classify neck and leg activity sensor data using on-farm health recordings for locomotor-associated diseases. Computers and Electronics in Agriculture, 173, 105404. https://doi.org/10.1016/J.COMPAG.2020.105404 DOI: https://doi.org/10.1016/j.compag.2020.105404
Gohari, M., Rahman, R. A., Raja, R. I., & Tahmasebi, M. (2012). A novel artificial neural network biodynamic model for prediction seated human body head acceleration in vertical direction. Journal of Low Frequency Noise, Vibration and Active Control, 31(3), 205–216. https://doi.org/10.1260/0263-0923.31.3.205 DOI: https://doi.org/10.1260/0263-0923.31.3.205
Griffin, M. J., & Erdreich, J. (1991). Handbook of human vibration. The Journal of the Acoustical Society of America, 90(4), 2213. http://dx.doi.org/10.1121/1.401606 DOI: https://doi.org/10.1121/1.401606
Grossi, E., & Buscema, M. (2007). Introduction to artificial neural networks. European Journal of Gastroenterology & Hepatology, 19(12), 1046-1054. http://dx.doi.org/10.1097/MEG.0b013e3282f198a0 DOI: https://doi.org/10.1097/MEG.0b013e3282f198a0
ISO. (2002). ISO 5008:2002: Agricultural wheeled tractors and field machinery - Measurement of whole-body vibration of the operator. International Standard Organization, Geneva.
ISO. (1997). ISO 2631-1:1997: Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration Part 1: General requirements. International Standard Organization, Geneva.
ISO. (2005). ISO 8041:2005: Human response to vibration - Measuring instrumentation. International Standard Organization, Geneva.
Khaksar, Z., Ahmadi, H., & Mohtasebi, S. (2013). Whole body vibration analysis of tractor operators using power spectral density. Journal of Mechanical Engineering and Technology, 1(1), 6–12. https://doi.org/10.18005/JMET0101002 DOI: https://doi.org/10.18005/JMET0101002
Kim, J. H., Dennerlein, J. T., & Johnson, P. (2018). The effect of a multi-axis suspension on whole body vibration exposures and physical stress in the neck and low back in agricultural tractor applications. Applied Ergonomics, 68, 80-89. https://doi.org/10.1016/J.APERGO.2017.10.021 DOI: https://doi.org/10.1016/j.apergo.2017.10.021
Kim, T.-H., Kim, Y.-T., & Yoon, Y.-S. (2005). Development of a biomechanical model of the human body in a sitting posture with vibration transmissibility in the vertical direction. International Journal of Industrial Ergonomics, 35(9), 817–829. https://doi.org/https://doi.org/10.1016/j.ergon.2005.01.013 DOI: https://doi.org/10.1016/j.ergon.2005.01.013
Koley, S., Sharma, L., & Kaur, S. (2010). Effects of occupational exposure to whole-body vibration in tractor drivers with low back pain in Punjab. Anthropologist, 12(3), 183-187. https://doi.org/10.1080/09720073.2010.11891151 DOI: https://doi.org/10.1080/09720073.2010.11891151
Krajnak, K. (2018). Health effects associated with occupational exposure to hand-arm or whole body vibration. Journal of Toxicology and Environmental Health, Part B, 21(5), 320–334. https://doi.org/10.1080/10937404.2018.1557576 DOI: https://doi.org/10.1080/10937404.2018.1557576
Kumar, A., Mahajan, P., Mohan, D., & Varghese, M. (2001). Tractor vibration severity and driver health: A study from rural India. Journal of Agricultural Engineering Research, 80(4), 313–328. https://doi.org/https://doi.org/10.1006/jaer.2001.0755 DOI: https://doi.org/10.1006/jaer.2001.0755
Liang, C.-C., & Chiang, C.-F. (2008). Modeling of a seated human body exposed to vertical vibrations in various automotive postures. Industrial Health, 46(2), 125–137. https://doi.org/10.2486/indhealth.46.125 DOI: https://doi.org/10.2486/indhealth.46.125
Mahore, V., Soni, P., Paul, A., Patidar, P., & Machavaram, R. (2024). Machine learning-based draft prediction for mouldboard ploughing in sandy clay loam soil. Journal of Terramechanics, 111, 31–40. https://doi.org/10.1016/J.JTERRA.2023.09.002 DOI: https://doi.org/10.1016/j.jterra.2023.09.002
Naygaonkar, S. S., & Desai, S. R. (2022). Experimental analysis of steering wheel vibrations of an agriculture tractor for reduction of hand-arm vibrations. Noise and Vibration Worldwide, 53(6), 308–321. https://doi.org/10.1177/09574565221093252 DOI: https://doi.org/10.1177/09574565221093252
Pradhan, N. C., Sahoo, P. K., Kushwaha, D. K., Makwana, Y., Mani, I., Kumar, M., Aruna, T. N., & Soumya Krishnan, V. (2023). A finite element modeling-based approach to predict vibrations transmitted through different body segments of the operator within the workspace of a small tractor. Journal of Field Robotics, 40(6), 1543–1561. https://doi.org/10.1002/ROB.22191 DOI: https://doi.org/10.1002/rob.22191
Scarlett, A. J., Price, J. S., & Stayner, R. M. (2007). Whole-body vibration: Evaluation of emission and exposure levels arising from agricultural tractors. Journal of Terramechanics, 44(1), 65–73. https://doi.org/10.1016/j.jterra.2006.01.006 DOI: https://doi.org/10.1016/j.jterra.2006.01.006
Singh, A., Nawayseh, N., Dhabi, Y. K., Samuel, S., & Singh, H. (2024). Transforming farming with intelligence: Smart vibration monitoring and alert system. Journal of Engineering Research, 12(2), 190–199. https://doi.org/10.1016/J.JER.2023.08.025 DOI: https://doi.org/10.1016/j.jer.2023.08.025
Singh, A., Nawayseh, N., Doyon-Poulin, P., Milosavljevic, S., Dewangan, K. N., Kumar, Y., & Samuel, S. (2025). Comparative analysis of classical and ensemble models for predicting whole body vibration induced lumbar spine stress. A case study of agricultural tractor operators. International Journal of Industrial Ergonomics, 108, 103775. https://doi.org/10.1016/J.ERGON.2025.103775 DOI: https://doi.org/10.1016/j.ergon.2025.103775
Singh, A., Nawayseh, N., Samuel, S., Dhabi, Y. K., & Singh, H. (2023a). Real-time vibration monitoring and analysis of agricultural tractor drivers using an IoT-based system. Journal of Field Robotics. https://doi.org/10.1002/ROB.22206
Singh, A., Nawayseh, N., Samuel, S., Dhabi, Y. K., & Singh, H. (2023b). Real-time vibration monitoring and analysis of agricultural tractor drivers using an IoT-based system. Journal of Field Robotics, 40(7), 1723–1738. https://doi.org/10.1002/ROB.22206 DOI: https://doi.org/10.1002/rob.22206
Singh, A., Nawayseh, N., Singh, L. P., Singh, S., & Singh, H. (2018a). Whole body vibration exposure during rotary soil tillage operation: The relative importance of tractor velocity, draft and soil tillage depth. International Journal of Automotive and Mechanical Engineering, 15(4), 5927–5940. https://doi.org/10.15282/IJAME.15.4.2018.15.0452 DOI: https://doi.org/10.15282/ijame.15.4.2018.15.0452
Singh, A., Samuel, S., Singh, H., Kumar, Y., & Prakash, C. (2021). Evaluation and analysis of whole-body vibration exposure during soil tillage operation. Safety, 7(3), 61. https://doi.org/10.3390/SAFETY7030061 DOI: https://doi.org/10.3390/safety7030061
Singh, A., Samuel, S., Singh, H., Singh, J., Prakash, C., & Dhabi, Y. K. (2022). Whole body vibration exposure among the tractor operator during soil tillage operation: An evaluation using ISO 2631-5 standard. Shock and Vibration, 20226412120. https://doi.org/10.1155/2022/6412120 DOI: https://doi.org/10.1155/2022/6412120
Singh, A., Singh, L. P., Singh, S., Singh, H., & Prakash, C. (2018b). Investigation of occupational whole-body vibration exposure among Indian tractor drivers. International Journal of Human Factors and Ergonomics, 5(2), 151–165. https://doi.org/10.1504/IJHFE.2018.092240 DOI: https://doi.org/10.1504/IJHFE.2018.10013611
Sorainen, E., Penttinen, J., Kallio, M., Rytkönen, E., & Taattola, K. (1998). Whole-body vibration of tractor drivers during harrowing. American Industrial Hygiene Association Journal, 59(9), 642–644. https://doi.org/10.1080/15428119891010820 DOI: https://doi.org/10.1080/15428119891010820
Sun, L., Shang, T., Chen, H., Wang, Z., Wang, C., & Luo, F. (2024). Development of a model for the optimization of the main factors influencing a 162kW wheeled tractor driver’s whole body vibration. Journal of Low Frequency Noise, Vibration and Active Control, 43(1), 156–169. https://doi.org/10.1177/14613484231190286 DOI: https://doi.org/10.1177/14613484231190286
Tiemessen, I. J. H., Hulshof, C. T. J., & Frings-Dresen, M. H. W. (2008). Low back pain in drivers exposed to whole body vibration: analysis of a dose–response pattern. Occupational and Environmental Medicine, 65(10), 667 – 675. https://doi.org/10.1136/oem.2007.035147 DOI: https://doi.org/10.1136/oem.2007.035147
Toward, M. G. R., & Griffin, M. J. (2011). The transmission of vertical vibration through seats: Influence of the characteristics of the human body. Journal of Sound and Vibration, 330(26), 6526–6543. https://doi.org/https://doi.org/10.1016/j.jsv.2011.07.033 DOI: https://doi.org/10.1016/j.jsv.2011.07.033
Upadhyay, R., Senapati, A., Bhattacherjee, A., Patra, A. K., & Chatterjee, S. (2021). A Comparison of multiple machine learning algorithms to predict whole-body vibration exposure of dumper operators in iron ore mines in India. International Journal of Statistics in Medical Research, 10, 169–182. https://doi.org/10.6000/1929-6029.2021.10.16 DOI: https://doi.org/10.6000/1929-6029.2021.10.16
Vallone, M., Bono, F., Quendler, E., Febo, P., & Catania, P. (2016). Risk exposure to vibration and noise in the use of agricultural track-laying tractors. Annals of Agricultural and Environmental Medicine, 23(4), 591–597. https://doi.org/10.5604/12321966.1226852, DOI: https://doi.org/10.5604/12321966.1226852
Velmurugan, P., Kumaraswamidhas, L. A., & Sankaranarayanasamy, K. (2014). Whole body vibration analysis for drivers of suspended cabin tractor semitrailer. Experimental Techniques, 38(2), 47–53. https://doi.org/10.1111/j.1747-1567.2011.00786.x DOI: https://doi.org/10.1111/j.1747-1567.2011.00786.x
