Evaluation of CIAE Screw Press for Production of Medium Fat Soy Flour
DOI:
https://doi.org/10.52151/jae2006432.1166Abstract
A laboratory level screw press on conceptual design of single feed double stage compression was developed and tested on soybean. Soybeans were given four different pre-optimised. pretreatment prior to their pressing in the developed CIAE screw press. These pretreatments included (i) dry extrusion cooking of whole and (ii) dehulled soy splits and (iii) blanching of whole and (iv) dehulled soy splits. Results indicated that using the developed screw press and studied pretreatments. good quality edible grade MFSF and soybean oil as per norms of Indian Standards could be produced. The developed press was found to have a maximum capacity of 15 kg/h and the specific energy consumption was 0.054 kWh/kg of feed.
Downloads
References
AACC. 1995. Approved Methods of the American Association of Cereal Chemists (8th Edn.) St. Paul, MN American Association of Cerals Chemists.
Ali N. 1991. Final Report of Indo-US Sub Project on Soybean Processing and Utilization. Central Institute of Agricultural Engineering, Bhopal.
Anonymous. 2004. CIAE Product Catalogue, Central Institute of Agricultural Engineering, Bhopal.
AOCS. 1980. Urease Activity. Official method Ba.9-58, American Oil Chemists' Society, Champaign, IL, USA.
BIS 1975a. Specification for edible low fat soy flour (IS 7336). Bureau of Indian Standards, Manak Bhawan, New Delhi.
BIS 1975b. Specification for edible medium fat soy flour (lS:7835). Bureau Of Indian Standards, Manak Bhawan, New Delhi.
Nelson A I; Wijeratne S W; Yeh S W; Wei T M; Wei L S. 1987. Dry-extrusion as an aid to mechanical expelling of oil from soybean. J. American Oil Chern. Soc., 64(9), 1341-1347.
Ohalson I S R. 1976. Processing effects on oil quality. J. Am. Oil Chern. Soc., 53, 299-30 I.
Singh B P N; Agarwal Y C. 1986. Mechanical deoiling of soybean: status, technology, approach and issues. In Proc. National Seminar on Soybean Processing and Utilization in India, Central Institute of Agricultural Engineering, Bhopal.
Singh J; Bargale P C; Shukla B D. 1989. Partial deoiling of soybean by mechanical pressing. J. Institution of Engineers (I), 69(AG-2), 98-100.
Singh J; Bargale P C. 1990. Effect of hydrothermal treatment on mechanical expression from soybean. J. Food Sci. Technol., 28(1), 1-7.
Singh J; Bargale P C. 1991. Performance evaluation of Mini-40 screw press (oil Expeller) with soybean. J. Oilseeds Res., 8 (I), 178-185.
