Development of a Stepwise Expanding Pitch Fruit Grader
DOI:
https://doi.org/10.52151/jae2005423.1138Abstract
In view of the importance of grading of fruits, a stepwise expanding pitch fruit grader based on the principle of changing the flap spacing along the length of movement of fruits was developed. The main components of the fruit grader are grading unit, elevator feeding unit, inspection platform and power transmission system. The grading unit consisted of two tracks of conveyor chains, matching sprockets, stainless steel flaps, conveyor supporters, flap space adjusting mechanism, power source, power transmission system and fruit collection trays. The elevator feeding unit is provided for constant and uniform feeding of fruits into the grading unit. The Inspection p1l1t form is provided for removal of damaged, diseased and unwanted fruits before they are fed to the elevator feeding unit. Cushioning material has been glued to the inspection platform, fruit collection tray and flaps to avoid impact damage at the time of grading. The grader has the provision to separate fruits into four grades by adjusting flap spacing between 45 to 140 mm. Testing of the fruit grader showed overall grading efficiency of 91.50% and 88.50%.for sweet lemon and orange, respectively. The capacity of the grader was 3.5 t/h at grading conveyor speed of 6 m1min. and there was no damage to the fruits while grading.
Downloads
References
Brennan JG; Butters JR; Gowell ND; LillyAEV 1976. Food engineering operations.'Second edition, Applied Science Publishers Limited, London, 34-57.
Bruter 1M; Farber VS; Krivopisk LG; Monastyrskii SB; Kushnir EM. 1983. Equipment for sorting fruit and vegetables according to size. USSR Patent, FSTA. 1969-12/95, AN 84-08-J 1310.
. Grover PC; Pathak BS 1972. Development of a wire belt potato sizer. Journal of Agricultural Engineering. Vol. IX, 4: 55-57.
Ingle NJ 1997. A divergent roller fruit sorter. Food Chain (Intermediate Technology). A Journal About Small Scale Food Processing, UK. 20: 16.
Mandhar SC; Senthil Kumaran G 1999. Mechanization of mango pickle and chutney industry. Paper presented in national seminar on food processing held at Gujarat Agricultural University, Anand, during November 2526, 1999.
O'Brien M 1968. Sorting, sizing and field filling of fruits and vegetables into bins. Journal of Agricultural Engineering Research, 13(4), 318-322.
Ornre PK 1999. Design and development of a multifruit grader. Unpublished Ph.D thesis. G.B. Pant University of Agriculture & Technology, Pantnagar, India.
Singhal V 2003. Indian Agriculture. Indian economic data research center, New Delhi.
Singh Bachchan 1980. Development and performance of differential belt-speed expanding pitch type potato grader. Journal of Agricultural Engineering. 10(2),6975.
Varshney AC; Mangaraj S; Birla SL. 2002. Fruit grading practices-Status and future assessment. Technical bulletin No. CIAEI2002/90. Central Institute of Agricultural Engineering, Bhopal, India.
Verma SR; Kalkat HS. 1975. Design and development of an expanding pitch rubber-spool potato sizer. Journal of Agricultural Engineering, 12(2), 35-40.
Von Beckmann JW; Bulley NR 1978. Electronic size and color grader for tomatoes. Transactions of the ASAE, 21(1), 25-30..
