A Software for Design of Drip Subunits with Tapered Pipes in Non-uniform Slopes

Authors

  • M. Krishnan Agricultural Engineering College and Research Institute, Kumulur, Lalgudi (Tk), Thiruchirappalli District - 621 712, India. Author
  • V. Ravikumar Agricultural Engineering College and Research Institute, Kumulur, Lalgudi (Tk), Thiruchirappalli District - 621 712, India. Author

DOI:

https://doi.org/10.52151/jae2002394.1019

Abstract

Designing of drip irrigation system with desired uniformity is a complex and time consuming process. Designing with tapered pipes makes the designing still difficult. Many alternative designs have to be evaluated to arrive at a satisfactory design. Therefore, in this work a software to design the drip irrigation subunit has been developed. A generic equation to determine pressure head distribution in pipelines with equally spaced multiple outlets with outflow at downstream end has been derived. The manufacturing variation of emitters has been accounted for by assuming it as normal distribution. The software has been so designed that the data entry and revision of design data and viewing the results are very much interactive and user friendly. The utility of the software has been demonstrated with a sample design of drip irrigation system for a real field situation.

Downloads

Download data is not yet available.

References

Anwar AA. 1999. Factor G for pipelines with equally spaced multiple outlets and outflow. 1. Irrig. and Drain. Engg., ASCE, 125(1): 34-39.

AnwarAA. 2000. Adjusted average correction factors for sprinkler Laterals. J. Irrig. and Drain. Engg., ASCE, 126(5), 296 - 303.

Sralts VF; Wu I PaL; Gitlin HM. 1980. Manufacturing variation and drip irrigation uniformity, Transactions of ASAE 23: 113-119.

Sralts VF.; Wu I Pai; Gitlin HM. 1981. Drip irrigation uniformity considering emitter plugging, Transactions of ASAE 24: 1234 - 1240.

Eduardo A Holzapfel; Miguel A Marino; Alejandro Valenzuela. 1990. Drip irrigation non-linear optimization model. 1. Irrig. and Drain. Engg., ASCE, 116( 4): 479 - 495.

Keller J; Bliesner D. 1990. Sprinkle and trickle irrigation. Van Nostrand Reinhold publications.

James LG. 1988. Principles of farm irrigation system design. John Wiley and sons, New York.: 280 -281.

Deo Narsingh. 1979. System Simulation with digital computer, Prentice Hall of India.

Ravikumar V; Bosu SS; Kumar V. 2001. Drip irrigation system design by energy gradient line approach for non uniform outflow. Agricultural Engineering J1. 10(3 & 4): 181-190.

Ravikumar V; Ranganathan CR; Sosu SS. 2003. Analytical Equation for variation of discharge in drip irrigation laterals, J1. of Irrig. And Drain. Engg., ASCE, (In press)

Wu I Pai 1997. An assessment of hydraulic design of micro-irrigation systems, Agricultural Water Management, 32:275-284.

Wu I Pai (1984). A uniplot method for drip irrigation lateral and submain design. Transactions of ASAE 27: 522 - 528.

Wu I PaL; Gitlin HM. 1974. Drip irrigation design based on uniformity. Transactions of ASAE, 17(3): 429 - 432.

Wu I Pai; Gitlin HM. 1975. Energy gradient line for drip irrigation laterals. 1. Irrig. and Drain. Engg., ASCE, 101(4): 323 - 326.

Wu I Pai; Gitlin HM. 1977. Design of drip irrigation lines with varying pipe sizes. 1. Irrig. And Drain. Engg, Transactions of ASAE 20: 429 - 432.

Wu I Pai; Gitlin HM. 1979. Drip irrigation design on non-uniform slopes. J. Irrig. and Drain. Engg., ASCE, 105(3): 289 - 303.

Published

2002-12-31

Issue

Section

Regular Issue

How to Cite

M. Krishnan, & V. Ravikumar. (2002). A Software for Design of Drip Subunits with Tapered Pipes in Non-uniform Slopes. Journal of Agricultural Engineering (India), 39(4), 28-36. https://doi.org/10.52151/jae2002394.1019