Effect of Process Parameters on Extraction of Essential Oil from Cumin

Authors

  • V. P. Sangani College of Agricultural Engineering and Technology, JAU, Junagadh Author
  • N. C. Patel Vice Chancellor, Junagadh Agricultural University, Junagadh Author

DOI:

https://doi.org/10.52151/jae2012494.1496

Keywords:

Essential oil, Cumin, Extraction, physico-chemical properties

Abstract

Cumin is an important spice containing about 2.5 to 4 % essential oil. The effect of particle sizes of cumin on distillation time was studied using a completely randomized design. Six levels of particle size, i. e. whole cumin (2.33 mm), 1000 μm, 711 μm, 503 μm, 356 μm, 251 μm of cumin were studied. Particle size of 356 μm and 5 h of distillation time is recommended for higher recovery and good quality of essential oil.

Downloads

Download data is not yet available.

References

Anon. 2012. Crop -wise area area, production and yield of food and non-food crops in Gujarat. A statistical production booklet published by Directorate of Agriculture, Govt. of Gujarat, Ahmedabad, pp: 35.

AOAC. 2005. Official Methods of Analysis, Association of Official Analytical Chemists, Washington, USA.

Gomez K A ; Gomez A A. 1984. Statistical Procedure for Agricultural Research. John Willy & Sons Inc. New York, pp: 680.

Mathew S M. 1985. Development of appropriate Technology for Extraction of Oils and Oleoresins from spices. Unpublished M.Tech. (P.H.E.) thesis, IIT, Kharagpur.

Singh G; Maurya S; De L M P; Catalan C A N. 2006. Studies on essential oils, Part 41. Chemical composition, antifungal, antioxidant and sprout suppressant activities of coriander (Coriandrum sativum) essential oils and its oleoresin. Flav. Frag. J., 21(3), 472-479.

Sultan M; Bhatti H N; Iqbal Z. 2005. Chemical analysis of essential oil of ginger (Zingiber officinale). Pak. J. Bio. Sci., 8(11), 1576-1578.

Published

2012-12-29

Issue

Section

Regular Issue

How to Cite

V. P. Sangani, & N. C. Patel. (2012). Effect of Process Parameters on Extraction of Essential Oil from Cumin. Journal of Agricultural Engineering (India), 49(4), 54-56. https://doi.org/10.52151/jae2012494.1496