Simulation and Validation of Airflow Distribution Patterns in Bins Filled with Canola

Authors

  • J. A. Moses Department of Biosystems Engineering, University of Manitoba, Winnipeg, Manitoba, Canada Author
  • D.S. Jayas Research and International) and Distinguished Professor, University of Manitoba, Winnipeg, Manitoba, Canada, Author
  • K. Alagusundaram Director, IICPT, Thanjavur, TN, India Author

DOI:

https://doi.org/10.52151/jae2014514.1561

Keywords:

Airflow distribution, pressure pattern, simulation, finite element modelling, duct configuration

Abstract

A non-linear model that can explain three dimensional airflow pressure patterns in bins filled with canola was developed using the finite element method. Resistance to airflow through the porous matrix (canola) was described using a modified form of Darcy’s equation. The airflow model was validated against experimental data obtained from studies conducted in a flat bottom bin of 4.6 m diameter containing‘Tobin’ canola, aerated using a fully perforated floor. The average relative error between the experimental and predicted values for the entire bin geometry was 1.8 per cent. Relative error values decreased with increasing grain bed height and bin diameter. The airflow pressure patterns resulting from eight other duct configurations were simulated. The model can be used to predict the airflow distribution in various grain beds and has the capability to handle variations in product type, moisture content, foreign material content, direction of airflow and aeration duct designs.

References

Alagusundaram K; Jayas D S. 1990. Airflow resistance of grains and oil seeds. Postharvest News Info., 1(4), 279–283.

Alagusundaram K; Jayas D S; Friesen O H; White N D G. 1989. A model to predict three-dimensional air pressure patterns in grain beds. ASAE Paper No. 89-4545, St. Joseph, MI: ASAE.

Alagusundaram K; Jayas D S; Friesen O H; White N D G. 1994. Airflow patterns through wheat, barley, and canola in bins with partially perforated floors: an experimental investigation. Appl. Eng. Agric., 10(6), 791-796.

Anon. 2003.Managing stored grain. Accessed on December 10, 2013, www.shivvers.com/files/files/Managing%20Stored%20Grain.pdf.

Bear J. 1972. Dynamics of Fluids in Porous Media, American Elsevier Publishing Company, Inc., New York, N.Y. (reprinted by Dover Publications, Inc., 1988).

Brooker D B. 1961. Pressure patterns in grain drying systems established by numerical methods. Trans. ASAE, 4, 72-74, 77.

Burges H D; Burrell N J. 1964. Cooling bulk grain in the British climate to control storage insects and improve keeping quality. J. Sci. Food Agric., 15, 32–50.

Burrell N J; Havers S J. 1970. Survey of some farm stores of ventilated grain. J. Sci. Food. Agric., 21, 458–464.

COMSOL. 2013. COMSOL Multiphysics – Subsurface flow Module. User’s Guide, Burlington, MA, USA.

Darcy H. 1857. Experimental research relating to the movement of water in pipes (in French “Recherches Experimentales Relatives au Movement de L’Eau deans les Tuyaux). Paris, Mallet-Bachelier, pp: 268.

Feng H; Tang J; Plumb O A;Cavalieri R P. 2004. Intrinsic and relative permeability for flow of humid air in unsaturated apple tissues. J.Food Eng., 62(2), 185-192.

Friesen O H; Huminicki D N. 1986.Grain aeration and unheated-air drying. Manitoba Agriculture, Winnipeg, Man. Agdex 732-1.

Jayas D S; Sokhansanj S; Moysey E B; Barber E M. 1987a. The effect of airflow direction on the resistance of canola (rapeseed) to airflow. Can. Agric. Eng., 29(2), 189-192.

Jayas D S; Sokhansanj S; Moysey E B; Barber E M. 1987b. Airflow resistance of canola (rapeseed). Trans. ASAE, 30(5), 1484-1488.

Jayas D S, Sokhansanj S, Moysey E B, Barber E M. 1990. Predicting airflow pressure in canola (rapeseed) bins. Can. Agric. Eng.,32, 249-254.

Jayas D S; Muir W E. 1991. Airflow-pressure drop data for modelling fluid flow in anisotropic bulks. Trans. ASAE, 34(1), 251-254.

Jayas D S; Mann D D. 1994. Presentation of airflow resistance data of seed bulks. Appl. Eng. Agric., 10(1), 79–83.

Jayas D S; Muir W E. 2002. Aeration systems design. In The mechanics and physics of modern grain aeration and management. Navarro S; Noyes R. CRC Press LLC, Florida, USA,pp: 203.

Jayas D S;Cenkowski S. 2006. Grain property values and their measurement. Handbook of Industrial Drying. NY, USA, Taylor and Francis Group, LLC, pp: 575.

Jindal V K, Thompson T L. 1972. Air pressure patterns and flow paths in two-dimensional triangular-shaped piles of sorghum using forced convection. Trans. ASAE, 15(4), 737-744.

Moses J A; Jayas D S; Alagusundaram K. 2013a. Resistance to airflow through bulk grains, oilseeds and other agricultural products – A review. J. Agric. Eng., 50(4), 1-13.

Moses J A; Chelladurai V; Alagusundaram K; Jayas D S. 2013b. Simulation of airflow distribution in stored bulk grain. Canadian Society for Bioengineering. CSBE/SCGAB 2013 Annual Conference, University of Saskatchewan,

Saskatoon, SK, 7-10 July.

Nalladurai K; Alagusundaram K; Gayathri P. 2002. Airflow resistance of paddy and its byproducts. Biosystems Eng., 83(1), 67–75.

Pabis S; Jayas D S; Cenkowski S. 1998. Grain Drying: Theory and Practice. John Wiley & Sons, Inc., New York, NY., pp: 266.

Pagano A M; Crozza D E; Nolasco S M. 2000. Airflow resistance of oat seeds: effect of airflow direction, moisture content and foreign material. Drying Technol., 18(1-2), 457-468.

Pierce R O; Thompson T L. 1975. Airflow patterns in conical-shaped piles of grain (temporary storage). Trans. ASAE, 18(5), 946-949.

Shedd C K. 1953. Resistance of grains and seeds to air flow. Agric. Eng., 34(9), 616–619.

Shunmugam G; Jayas D S; White N D G; Muir W E. 2005. Diffusion of carbon dioxide through grain bulks. J. Stored Prod. Res., 41, 131–144.

Sinicio R; Muir W E. 1998. Aeration strategies for preventing spoilage of wheat stored in tropical and subtropical climates. Appl. Eng. Agric., 14(5), 512-527.

Smith E A; Jayas D S. 2004. Calculation and limitations of traverse time in designing forced ventilation systems. Trans. ASAE, 47(5), 1635–1642.

Thomas P M. 1984. Swathing - combining, storage and conditioning of canola. In: Canola Growers Manual, Canola Council of Canada, Winnipeg, Manitoba, 1101-1215.

Ville A D; Smith E A. 1996. Airflow through beds of cereal grains. Appl. Math. Modell., 20(4), 283–289.

Whitaker S; Chou W T. 1983. Drying granular porous media-theory and experiment. Drying Technol., 1(1), 3-33.

Published

2014-12-31

Issue

Section

Regular Issue

How to Cite

J. A. Moses, D.S. Jayas, & K. Alagusundaram. (2014). Simulation and Validation of Airflow Distribution Patterns in Bins Filled with Canola. Journal of Agricultural Engineering (India), 51(4), 14-20. https://doi.org/10.52151/jae2014514.1561