Effect of Roasting Method on Physico-Mechanical and Roasting Characteristics of Chickpea (Cicer arietinum)

Vijay Singh Sharanagat; Praveen Jogihalli; Lochan Singh; Kshitiz Kumar

doi:10.52151/jae2018551.1644

Authors

Vijay Singh Sharanagat Department of Food Engineering, NIFTEM, Haryana, India Author
Praveen Jogihalli Department of Food Engineering, NIFTEM, Haryana, India Author
Lochan Singh Department of Agriculture and Environmental Sciences, NIFTEM, Haryana, India Author
Kshitiz Kumar Department of Food Engineering, NIFTEM, Haryana, India Author

DOI:

https://doi.org/10.52151/jae2018551.1644

Keywords:

Sand roasting, microwave roasting, chickpea grain, physico-mechanical properties, roasting characteristics, rupture force

Abstract

Chickpea grains were roasted by traditional sand roasting (180, 200 and 220ºC) and microwave roasting (450 W, 600 W and 900 W) for 5, 10 and 15 min. The effects of roasting method and their parameters on physico-mechanical and roasting characteristics were determined. Roasting led to an increase in size, sphericity, angle of repose, porosity and puffing index of chickpea. Significant (p<0.05) reduction in fracture force and coefficient of friction was observed. True density decreased with roasting and the lowest value of 787.87 kg.m-3 was observed on sand roasting at 180°C for 15 min. The highest value of puffing index (179.87 %) and length/width ratio (155.04 %) was observed for sand roasting at 220ºC for 15 min and 5 min, respectively. The force required for rupture of chickpea reduced with roasting, and the lowest value (32.28 N) was observed during sand roasting at 220ºC for 10 min. The optimum roasting condition identified for sand and microwave roasting to obtain higher puffing index, lower hardness and rupture energy was observed to be 220 ºC for 10 min and 600 W for 15 min, respectively.

Author Biographies

Vijay Singh Sharanagat, Department of Food Engineering, NIFTEM, Haryana, India

Assistant Professor,
Praveen Jogihalli, Department of Food Engineering, NIFTEM, Haryana, India

M. Tech Student,
Lochan Singh, Department of Agriculture and Environmental Sciences, NIFTEM, Haryana, India

Ph. D Scholar,
Kshitiz Kumar, Department of Food Engineering, NIFTEM, Haryana, India

Assistant Professor,

References

Altuntas E; Yildiz M. 2007. Effect of moisture contenton some physical and mechanical properties of faba bean (Vicia faba L.) grains. J. Food Eng., 78, 174–183.

Amin M N; Hossain M A; Roy K C. 2004. Effects of moisture content on some physical properties of lentil seeds. J. Food Eng., 65, 83–87.

Arjun S; Girish G; Nagaraju V D; Sridhar B S. 2017. Physico-fracture characteristics of makhana (Euryale ferox) seeds. Int. J. Food Prop., 20 (Suppl. 2), 1204-1209.

Bagheri H; Kashaninejad M; Ziaiifar A M; Aalami M. 2016. Novel hybridized infrared-hot air method for roasting of peanut kernels. Innovative Food Sci. Emerg. Technol., 37(A), 106–114.

Bhattacharya S; Prakash M. 1997. Kinetics of roasting of split chickpea (Cicer arietinum). Int. J. Food Sci. Technol., 32, 81–84.

Figueiredo A K D; Baümler E; Riccobene I C; Nolasco S M. 2011. Moisture-dependent engineering properties of sunflower seeds with different structural characteristics. J. Food Eng., 102, 58-65.

Gokmen S. 2004. Effects of moisture content and popping method on popping characteristics of popcorn. J. Food Eng., 65, 357–362.

Hojjati M; Lipan L; Carbonell-Barrachina Á A. 2016. Effect of roasting on physicochemical properties of wild almonds. J. Am. Oil Chemists’ Soc., 93, 1211-1220.

Işıkl N D; Şenol B; Çoksöyler N. 2014. Some physical and mechanical properties of roasted Zerun wheat. J. Food Sci. Technol., 51(9), 1990–1997.

Jha S N. 1999. Physical and hygroscopic properties of makhana. J. Agric. Eng. Res., 72(2), 145-150.

Jha S N; Kachru R P. 1998. Physical and aerodynamic properties of makhana. J. Food Process Eng., 79 (21), 301-316.

Jideani V A; Wyk J V; Cruywagen M H. 2009. Physical properties of Tylosema esculentum and the effect of roasting on the functional properties of its flour. Afr. J. Agric. Res., 4 (11), 1208-1219.

Jogihalli P; Singh L; Sharanagat V S. 2017a. Effect of microwave roasting parameters on functional and antioxidant properties of chickpea (Cicer arietinum). LWT - Food Sci. Technol., 79, 223–233.

Jogihalli P; Singh L; Kumar K; Sharanagat V S. 2017b. Physico-functional and antioxidant properties of sand-roasted chickpea (Cicer arietinum). Food Chem.,237, 1124–1132.

Jokanović M R; Džinić N R; Cvetković B R; Grujić S; Odžaković B. 2012. Changes of physical properties of coffee beans during roasting. Acta Period. Technol.,43, 21-31.

Kahyaoglu T; Kaya S. 2006. Modeling of moisture, color and texture changes in sesame seeds during the conventional roasting. J. Food Eng., 75 (2), 167–177.

Karababa E. 2006. Physical properties of popcorn kernels. J. Food Eng., 72, 100–107.

Kaur M; Singh N; Sodhi N S. 2005. Physicochemical, cooking, textural and roasting characteristics of chickpea (Cicer arietinum L.) cultivars. J. Food Eng., 69(4), 511–517.

Khan A; Saini C S. 2016. Effect of roasting on physicochemical and functional properties of flaxseed flour. Cogent Eng., 3, 1-14.

Kita A; Figiel A. 2007. Effect of Roasting on Properties of Walnuts. Pol. J. Food Nutr. Sci., 57 (2A), 89-94.

Klensporf D; Jelen H H. 2008. Effect of heat treatment on the flavor of oat flakes. J. Cereal Sci., 48 (3), 656–661.

Koksel H; Sivri D; Scanlon M G; Bushuk W. 1998. Comparison of physical properties of raw and roasted chickpeas (leblebi). Food Res. Int., 31(9), 659-665.

Kudos S K A; Gupta R K; Mridula D. 2016. Moisture dependent physical properties of buckwheat. J. Agric.Eng., 53 (1), 41-52.

Mariotti M; Alamprese C; Pagani M A; Lucisano M. 2006. Effect of puffing on ultrastructure and physical characterstics of cereal grains and flours. J. Cereal Sci., 43 (1), 47-46.

Mir S A; Bosco S J D; Shah M A; Mir M M. 2016. Effect of puffing on physical and antioxidant properties of brown rice. Food Chem., 191, 139–146.

Mishra G; Joshi D C; Mohapatra D; Babu V B. 2015. Varietal influence on the microwave popping characteristics of sorghum. J. Cereal Sci., 65, 19-24.

Mishra V; Yadav N; Puranik V. 2014. Effect of processing methods on the nutraceutical and antioxidant properties of red rice (OryzaNivara). Int. J. Food Nutr. Sci., 3 (4), 98-103.

Mohsenin N N. 1986. Physical Properties of Plant and Animal Materials. Gordon and Breach Science Publishers Inc, New York, 51–87.

Mridula D; Goyal R K; Manikantan M R. 2008. Effect of roasting on texture color and acceptability of pearl millet for making sattu. Int. J. Agric. Res., 3(1), 61-68.

Murthy K V; Ravi R; Bhat K K; Raghavarao K S M S. 2008. Studies on roasting of wheat using fluidized bed roaster. J. Food Eng., 89 (3), 336–342.

Nader J; Afif C; Louka N. 2015. Study of physiological and textural properties of roasted peanuts defatted by an innovative oil extraction process. Correlation with consumer evaluation. Innovative Food Sci. Emerg.Technol., 33, 450–461.

Nimkar P M; Chattopadhyay P K. 2001. Some physical properties of green gram. J. Agric. Eng. Res., 80 (2), 183-189.

Patel N; Jagan S K; Jha S K; Sinha J P; Kumar A. 2013. Physical properties of Basmati varieties of paddy. J. Agric. Eng., 50(4), 39-47.

Saklar S; Katnas S; Ungan S. 2001. Determination of optimum hazelnut roasting conditions. Int. J. Food Sci. Technol., 36(3), 271-281.

Shakerardekani A; Karim R; Mohd Ghazali H; Chin N L. 2011. Effect of roasting conditions on hardness, moisture content and colour of pistachio kernels. Int. Food Res. J., 18, 723-729.

Sharanagat V S; Goswami T K. 2014. Effect of moisture content on physio-mechanical properties of coriander seeds (Coriandrumsativum). Agric. Eng. Int.: The CIGR e-journal, 16(3), 166-172.

Sharma P; Gujral H S. 2011. Effect of sand roasting and microwave cooking on antioxidant activity of barley. Food Res. Int., 44(1), 235–240.

Sharma P; Gujral H S; Rosell C M. 2011. Effects of roasting on barley b-glucan, thermal, textural and pasting properties. J. Cereal Sci., 53 (1), 25-30.

Sharma S; Sharma H P; Prasad K. 2015. Effect of roasting on comparative physical characteristics of linseed kernels. South Asian J. Food Technol. Environ., 1(1), 58-63.

Singh K K; Goswami T K. 1996. Physical properties of cumin seed. J. Food Eng., 64(2), 93–98.

Singh R K; Vishwakarma RK; Vishal M K; Goswami D; Mehta R S. 2016. Moisture dependent physical properties of Dill. J. Agric. Eng., 53 (1), 33-40.

Sirisomboon P; Kitchaiya P. 2009. Physical properties of Jatropha curcas L. kernels after heat treatments. Biosyst. Eng., 102, 244–250.

Sirisomboon P; Kitchaiya P; Pholpho T; Mahuttanyavanitch W. 2007. Physical and mechanical properties of Jatropha curcas L. fruits, nuts and kernels. Biosyst. Eng., 97, 201–207.

Tirawanichakul S; Tirawanichakul Y; Sniso E. 2008.Paddy dehydration by adsorption: Thermo-physical properties and diffusion model of agriculture residues.Bio-syst. Eng., 99, 249 – 255.

Uysal N; Sumnu G; Sahin S. 2009. Optimization of microwave–infrared roasting of hazelnut. J. Food Eng., 90 (2), 255–261.

Wani I A; Gani A; Tariq A; Sharma P; Masoodi F A; Wani H M. 2016. Effect of roasting on physicochemical, functional and antioxidant properties of arrowhead (Sagittariasagittifolia L) flour. Food Chem., 197(A), 345–352.

Williams P C; Singh U. 1987. Nutritional quality and the evaluation of quality in breeding programs. In: The Chickpea, [Saxena M C; Singh K B, Eds.], Wallingford, UK: CAB International, 329-356.